Iron removal filters have become an important water treatment process for providing clean and safe drinking water in Australia. Small amounts of iron are frequently present in water because iron is naturally present in the soil and because corrosive water will pick up iron from unprotected ferrous pipes.
The filters are equally suitable for the removal of low and high concentrations of dissolved iron. The filters are commercial in size and have been used to remove iron concentrations up to 50mg/L. The system can also be used as a pre-treatment stage before other conventional applications such as Reverse Osmosis, Ion-Exchange, Micro-Filtration, etc.Include Manual backwash Valve.
Manual backwash valve is included. When you need to backwash a filter, you put it into the backwash cycle for 10 minutes, followed by a rinse for 3 minutes and then back into the service mode. Once a week schedule for backwashing is generally sufficient.
Available sizes: 8” x 17”, 8” x 35”, 10” x 17”, 10” x 54” and 12” x 52”, 16” x 65”, 18” x 65”.