Water Filtration Systems in Perth Australia

One of the visions of our company is to be one of the top most domestic water filtration systems equipment suppliers in Australia. A cartridge filter is a filter that uses a barrier or sift method in order to remove and clean sediments and harmful solids out of water. Some of these filters are made to stop microscopic items and others are made simply to stop the major solids from entering a system. Cartridge filters are used in everything from drinking water purification systems to swimming pools and fish aquariums. Most cartridge filters are usually kept in a housing. Most filters have since become more powerful, capable of filtering out more material. In many cases, the cartridge filter in a swimming pool may be re-used. This can save a substantial amount of money. To clean the cartridge filter, all that is usually required is removing it from its housing and hosing it off. Many prefer to use a cartridge filter when drinking water from a home tap due to the number of additives often found in municipal water systems. Chlorine and other additives, used to make the water safe, can also leave an undesirable taste and odour. A cartridge filter can be used to take some of these chemicals out of the water, leading to an improved taste. Unlike pool filters, most drinking water filters are not meant to be used more than once. Therefore, many may wish to keep replacements on hand, as the filters may last only a few months or less. Usually, the manufacturer will recommend a replacement schedule, though many owners may determine their own replacement schedule by considering taste and looking for any other sediments that may be getting through.

Dehorning Cattle Australia

Dehorning paste will prevent the growth of horns when properly applied to the horn buds of new-born (less than one to eight weeks of age) calves. The chemical destroys the horn-producing cells around the horn bud. The chemical is available as a paste. To protect yourself, wear gloves when applying the chemicals. To protect the calf, avoid application near its eyes. Do not use Dehorning paste in rainy weather.

Polyacrylamide supplier Australia

Polyacrylamide (PAM) is a water-soluble polymer formed from acrylamide subunits. PAM is most often used to increase the viscosity of water or to encourage flocculation of particles present in water such as general industrial wastewater and all kinds of municipal wastewater and sewage. PAM causes suspended particles in wastewater to aggregate, forming a floc. PAM makes the fine solids in treated water adhere to one another until they become big enough to settle out or be captured by filters to make sewage sludge which can be filtered or removed more easily. All Chemical being a reputable and experienced Polyacrylamide supplier in Australia, we offer the lowest prices. Applications include paper making, petrochemical extraction, Sugar manufacturing, electroplating, textiles, oilfields, food processing, pharmaceutical, leather, breweries, wineries, slaughterhouses and to treat water from mineral mining processes, including production of coal (coal washing),Ore washing, building material, lead, titanium, gold, zinc, iron, sand, phosphoric acid, silver, nickel, copper, steel, gravel, alumina uranium as well as potash processing.

Aluminum Sulphate Manufacturers for Water Treatment in Perth Australia

Aluminium sulphate (Aluminium sulphate) is a chemical compound with the formula Al2(SO4)3. It is soluble in water and many industries rely on Aluminium sulphate for water treatment, because it is an incredible flocculating agent that facilitates purification of drinking water and is widely used in waste water treatment plants, and also in paper manufacturing and as a mordant in dyeing and printing textiles. In water purification, it causes impurities to coagulate which are removed as the particulate settles to the bottom of the clarifier or more easily filtered. This process is called coagulation or flocculation. A coagulant is therefore usually the first chemical that is added in water purification processes. After adding a coagulant, pin sized flocc particles are formed. To help make the flocc grow larger in size so that it will separate more easily from the water, a second chemical is added and this is usually a polymer. The polymer helps to collect the pin sized particles together to create bigger floccs that either sink faster or are more easily floated in a DAF system. Aluminium sulphate is used in paper industries after the waste water management. It works for the treatment of various problems as it works as flocculant, emulsion breaker coagulant and precipitant. These are easily soluble and can be filtered easily.

At All Chemical Manufacturing & Consultancy, we provide Aluminium sulphate for water treatment at both small and large scale.

Water and Soil Testing Albany Australia

Bore Water & Soil Testing Perth, Australia

Clean water assures the well being of an individual. Don’t guess what is in your drinking water, know it. All Chemical can test your water for nasty pathogens such as E-coli and Legionella bacteria, elements such as iron, silica, calcium carbonates, heavy metals such as lead (Pb) and many more and provide long lasting innovative solutions to these problems. With our professional service, you don’t have to worry anymore about the safety of your drinking water (Bore, Dam, River or Rain water) and other Waste water. At our labs we test with our high-quality analysis program. Bore water and soil testing in Albany is done for various sectors and industries. The laboratory is equipped with the right equipment and updated according to the technology to ensure supply of effective water purifiers in Perth, Australia.

Looking for Water and Soil Testing in Perth?

The testing system that we provide is affordable. The different ranges of price packages we have available allows for installation of affordable filtration system relevant to any industry sector. Site inspection is recommended before deciding the best technique that can be used to purify your water. SILT DENSITY INDEX (SDI) Membrane fouling is the main cause of permeate flux decline and loss of product quality in reverse osmosis (RO) Systems, so fouling control dominates RO system design and operation. SDI is a measurement of the fouling potential of suspended solids. It measures the time required to filter a fixed volume of water through a standard 0.45µm pore size microfiltration membrane with a constant given pressure of 30 psi (2,07 bar). An SDI of less than 5 is considered acceptable for the reverse osmosis systems and no pre-filtration is necessary. A media (sand-type) filter is required if the value of SDI ranges from 5-10. If the SDI is greater than 10, a 2-stage media filtration is necessary, possibly with the aid of coagulants or settling tanks.

Contact All Chemical for Commercial Grade Water & Soil Testing Apparatuses in Perth

Sodium metabisulfite

Also known as Sodium Pyrosulfite or Disodium. Used in RO units, at no time should there be a Free Chlorine residual in RO feed water. Even very low levels of chlorine in the feed stream will result in irreparable oxidation damage of the membrane. Therefore operators should ensure that oxidants do not enter the RO system by using a chemical reducing agent such as sodium bisulfite.It is also used as a disinfectant, antioxidant and preservative agent. In winemaking, this basically has two purposes: to kill wild yeast and for use as a sanitizing agent. Use it before to clean bottles, carboys, and to soak corks in a solution before bottling.

Potassium metabisulphate

Also known as Potassium Pyrosulfite, is a white crystalline powder with a pungent sulphur odour. The main use for the chemical is as an antioxidant or chemical sterilant. In winemaking this has two purposes: to kill wild yeast and for use as a sanitizing agent. Use it before to clean bottles, carboys, and to soak corks in a solution before bottling.

Calcium Carbonate

Calcium carbonate comes in many forms such as limestone, Stock lime, Ground marble or Calcite. It is mainly used in water treatment and swimming pools. It is used as a neutralizing agent, filler, antacid, extender in paints, pacifying agent in paper, Source of lime and in Portland cement

The Langelier Index(LSI)is an approximate indicator of the degree of saturation of water with calcium carbonate. The Langelier Index is one of several tools used by water operators for stabilizing water to control both internal corrosion and the deposition of scale. Water supply operators can optimize their water supply systems and identify leakage potentials with the Langelier Index. It is calculated using the pH, alkalinity, calcium concentration, total dissolved solids, and water temperature of the water sample.

If the Langelier Index is negative, then the water is under saturated with calcium carbonate and will tend to be corrosive in the distribution system.

If the Langelier Index is positive, then the water is over saturated with calcium carbonate and will tend to deposit calcium carbonate forming scales in the distribution system

If Langelier Index is close to zero, then the water is just saturated with calcium carbonate and will neither be strongly corrosive or scale forming.

Experience has shown that Langelier Index in the range of -1 to +1 has a relatively low corrosion impact on metallic components of the distribution system. Langelier Index values outside this range may result in laundry stains or leaks.

Oxalic Acid

Oxalic acid is a colourless crystalline organic solid compound assay greater than 99.4% and dissolves in water to give colorless solutions. Oxalic acid’s main applications include cleaning or bleaching, especially for the removal of rust, it is used as a mordant in dying processes, for making cleaning liquid for electrical instruments, for deposition and separation of rare-earth metals, for water treatment, for bleaches, especially for pulpwood, timber cleaning and restoration. Oxalic acid is an important reagent in lanthanide chemistry. Hydrated lanthanide oxalates form readily in strongly acidic solutions.

Polymers

These are higher molecular weight compounds and come in a variety of anionic and cationic charges. Polymers are most often used to increase the viscosity of water or to encourage flocculation of particles present in water such as general industrial wastewater and all kinds of municipal wastewater and sewage. Polymers cause suspended particles in wastewater to aggregate, forming a floc and make fine solids in treated water adhere to one another until they become big enough to settle out or be captured by filters to make sewage sludge which can be filtered or removed more easily. Polymers are used extensively for a wide variety of industrial processes involving paper making, petrochemical extraction, Sugar manufacturing, electroplating, textiles, oilfields, food processing, pharmaceutical, leather, breweries, wineries, slaughterhouses and to treat water from mineral mining processes, including production of coal (coal washing), Ore washing, lead, titanium, gold, zinc, iron, sand, phosphoric acid, silver, nickel, copper, steel, gravel, alumina uranium as well as potash processing.

Odour Cleaners

Odour emissions from sewage treatment plants, rising mains and pump stations are a concern with an increase in odour related complaints over the years.

All Chemical MOH100 is widely used odour control in sewage networks.

Citric Acid and Acid Cleaners

    Citric Acid and Acid Cleaners are specially formulated solutions designed to remove iron and other inorganic foulings from polyamide membranes. They also remove some organic foulings. They have been formulated to give a pH of about 4 to the cleaning solutions at the correct concentrations.

  • PPA8560 is used for removing hard water stains on surfaces and in RO membranes.
  • CAC550 is used for removing hard water stains and ions in RO membranes
  • CAC1000 is used for removing hard water stains and ions in RO membranes
  • CAH2520 is used for removing hard water stains and ions in RO membranes

Water Softeners and Equipment Supplier Australia

When water contains a significant amount of dissolved salts such as calcium and magnesium, it is called hard water. Hard water is known to clog pipes and greatly reduce the efficiency of hot water boilers and tanks. Hard water also reduces the amount of chemicals such as soap and detergent that can dissolve in water and increases the cost of water heating by about fifteen to twenty percent. Therefore, water softening is a technique that removes ions that causes the water to be hard. Using softened water means expanding the life span of equipment and machines, such as boilers, laundry machines, and the pipelines. It also contributes to the improved working, and longer lifespan of solar heating systems, air conditioning units and many other water-based applications.

  • All Chemical GSC100 and GPC200 are used as hard water softeners

Rust Cleaners

  • Rust Cleaners are used for removing rust stains and stubborn RED DUST on a wide variety of equipment surfaces. The solution is also used for bleaching, as a mordant in dying processes, for making cleaning liquid for electrical instruments, for deposition and separation of rare-earth metals, for water treatment, for bleaches, especially for pulpwood, timber cleaning and restoration.

Bio Algaecides

BioAlgaecide is nontoxic, organic and environmentally friendly. BioAlgaecide is safe for your fish and all aquatic life. It is also safe for your pets to drink. BioAlgaecide works with your water plants reducing nitrates and phosphates naturally.

BioAlgaecid comes in water dissolvable sachets. To apply BioAlgaecide, you simply drop a water dissolvable BioAlgaecide sachet into the water source. The sachet dissolves on contact with water exposing and introducing the nontoxic and environmentally friendly microorganism into the water. All our different pack sizes treat water for 3 months. Whether you have an Aquarium, Fishpond, Water feature, Dam or Water Troughs or drinking water for livestock in the city or country side, we have BioAlgaecide Packs specially designed for you. Algae control in artificial bodies of water such as lakes, ponds, aquaculture and waste water lagoons have been simplified by using BioAlgaecide, no measuring, no spillages and no messy.

Chlorine tablets

Water disinfection means the removal, deactivation or killing of pathogenic microorganisms. Microorganisms are destroyed or deactivated, resulting in termination of growth and reproduction. When microorganisms are not removed from drinking water, drinking water usage will cause people to fall ill.

Disinfectants should not only kill microorganisms. Disinfectants must also have a residual effect, which means that they remain active in the water after disinfection. A disinfectant should prevent pathogenic microorganisms from growing in the plumbing after disinfection, causing the water to be re-contaminated

Sodium hypochlorite solution sometimes known as liquid Chlorine kills bacteria, algae, and many other microorganisms in swimming pools, drinking water, waste water, sewage treatment and many other industrial wastes.
When applied to industrial waste water, Sodium hypochlorite reduce odors by neutralizing sulphur hydrogen gas (SH) and ammonia (NH3). It is also used to detoxify cyanide baths in metal industries. Hypochlorite can be used to prevent algae and shellfish growth in cooling towers. In water treatment and swimming pools, Sodium hypochlorite is used to disinfect water. In households, hypochlorite is used frequently for the purification and disinfection of the house. It has the advantage that microorganisms cannot build up any resistance to it. Sodium hypochlorite is effective against Legionella bacteria and bio film, in which Legionella bacteria can multiply.

Advantages of Sodium hypochlorite as a disinfectant includes easy to transport, store and dosage is simple. Sodium hypochlorite produces residual disinfectant.
Other disinfectants that can be used include UV sterilization with the following advantages:
– UV does not alter taste, odour, colour or pH of the water
– UV does not require the addition of chemicals
– UV does not impart toxic by-products into the water
– UV systems are compact and easy to install
– UV systems require very little maintenance
– Running costs are often lower than those of a household light bulb
UV sterilization deactivate notorious pathogens such as Giardia Lambia and Cryptosporidium.
When a micro-organism is exposed to UV-C, the nuclei of the cells are modified, due to photolytic processes. In result, cell division and, by extension, reproduction is prevented.

Sodium hypochlorite

Water disinfection means the removal, deactivation or killing of pathogenic microorganisms. Microorganisms are destroyed or deactivated, resulting in termination of growth and reproduction. When microorganisms are not removed from drinking water, drinking water usage will cause people to fall ill.

Disinfectants should not only kill microorganisms. Disinfectants must also have a residual effect, which means that they remain active in the water after disinfection. A disinfectant should prevent pathogenic microorganisms from growing in the plumbing after disinfection, causing the water to be re-contaminated

Sodium hypochlorite solution sometimes known as liquid Chlorine kills bacteria, algae, and many other microorganisms in swimming pools, drinking water, waste water, sewage treatment and many other industrial wastes.
When applied to industrial waste water, Sodium hypochlorite reduce odors by neutralizing sulphur hydrogen gas (SH) and ammonia (NH3). It is also used to detoxify cyanide baths in metal industries. Hypochlorite can be used to prevent algae and shellfish growth in cooling towers. In water treatment and swimming pools, Sodium hypochlorite is used to disinfect water. In households, hypochlorite is used frequently for the purification and disinfection of the house. It has the advantage that microorganisms cannot build up any resistance to it. Sodium hypochlorite is effective against Legionella bacteria and bio film, in which Legionella bacteria can multiply.

Advantages of Sodium hypochlorite as a disinfectant includes easy to transport, store and dosage is simple. Sodium hypochlorite produces residual disinfectant.
Other disinfectants that can be used include UV sterilization with the following advantages:
– UV does not alter taste, odour, colour or pH of the water
– UV does not require the addition of chemicals
– UV does not impart toxic by-products into the water
– UV systems are compact and easy to install
– UV systems require very little maintenance
– Running costs are often lower than those of a household light bulb
UV sterilization deactivate notorious pathogens such as Giardia Lambia and Cryptosporidium.
When a micro-organism is exposed to UV-C, the nuclei of the cells are modified, due to photolytic processes. In result, cell division and, by extension, reproduction is prevented.

Sulphuric Acid

Sulphuric acid is a strong corrosive mineral acid. It is soluble in water at all concentrations. Sulphuric acid is used in many chemical industries, mostly as a strong chemical acid in waste water treatment systems, including mineral processing, oil refining, domestic acid drain cleaner, various cleaning agents, electrolyte in lead acid batteries and fertilizer manufacturing.

Ferric Sulphate

Ferric Sulphate FRS4200 Technical Grade as a coagulant formations stable flocs over a wide range of pH, typically any pH value between 4.5 and 12. Most raw waters, whether they originate from a reservoir or from a river, will contain pollutants in both colloidal and suspended forms. Colloidal systems tend to be extremely stable and will generally have a particle size in the range 10-9m to 10-7m,wheras suspended solids will generally have a particle size above 10-7m. The addition of Ferric Sulphate FRS4200 to a colloidal system ensures the introduction of highly charged metal ions, this destabilises the colloidal system and allow the formation of flocs as the hydroxide radicals of iron bond together. Use of Ferric Sulphate FRS4200 offers a significant cost saving.

Wetting Agents

Wetting agents are substances that reduce the surface tension of water to allow it to spread drops onto a surface, increasing the spreading abilities of a liquid. Lowering the surface tension lowers the energy required to spread drops onto a film, thus weakening the cohesive properties of the liquid and strengthening its adhesive properties. The simplest way to improve water take up by hydrophobic soils is to use a soil wetting agent. When organic matter on the soil breaks down it leaves a waxy coating on the soil particles. Wetting agents are like detergents. They overcome that waxing coating and allow water to penetrate into the pore spaces between. There are four main types of wetting agents: anionic, cationic, amphoteric, and nonionic.

  • Anionic, cationic, and amphoteric wetting agents ionize when mixed with water.
  • Anions have a negative charge, while cations have a positive charge.
  • Amphoteric wetting agents can act as either anions or cations, depending on the acidity of the solution.
  • Nonionic wetting agents do not ionize in water. A possible advantage for using a nonionic wetting agent is that it does not react with other ions in the water, which could lead to formation of a precipitate.

Wide range of application such as in Plant growth regulation, Herbicides, Pesticides, Antiseptics, Fertilizers and trace elements. One example of how wetting agents work is in the formation of micelles. Micelles consist of hydrophilic heads forming an outer layer around lipophilic tails. When in water, the micelles’ tails can surround an oil droplet while the heads are attracted to the water.

Sodium Persulfate

Sodium persulfate (Na2S2O8) is a chemical compound used as a bleach and as a detergent component. It is a replacement for ammonium persulfate in etching mixtures for zinc and printed circuit boards, and is used for pickling of copper and some other metals. It is used as a radical initiator for emulsion polymerization reactions and for accelerated curing of low formaldehyde adhesives. It is also used as a soil conditioner and in manufacture of dyestuffs, modification of starch, bleach activator, desizing agent and a lot more..

Sodium Hydroxide solution 50%

Sodium hydroxide is used in many industries, mostly as a strong chemical base used in drinking water and waste water treatment systems. It is used in the manufacture of soaps, detergents, textiles, pulp and paper and as a drain cleaner.

Sodium Hydroxide micro-pearls

Sodium hydroxide micro-pearls are used in many industries, mostly as a strong chemical base used in drinking water and waste water treatment systems. It is used in the manufacture of soaps, detergents, textiles, pulp and paper and as a drain cleaner.

Activated Carbon

Used in RO units, at no time should there be a Free Chlorine residual in RO feed water. Even very low levels of chlorine in the feed stream will result in irreparable oxidation damage of the membrane. Therefore operators should ensure that oxidants do not enter the RO system by using common pretreatment methods for reducing chlorine levels by absorption onto activated granular carbon filter media. All Chemical GNC100 and PNC200 are most cost effective carbon based compounds available for the removal of Free Chlorine residual and many types of odours such as hydrogen sulphide (H2S), ammonia (NH3), Volatile organics, Off-gas from tank vents, decomposition odours from greenhouses, and general industrial odours.

  • GNC100 is a granulated form activated carbon and is used in many wastewater plants and general industry.
  • PNC200 is a powdered form activated carbon and is used in many wastewater plants and general industry.

Inhibitors and Antiscalants

Scaling means the deposition of particles on a membrane and heat exchanger tubes, causing it plugging of these componants. All Chemical CSTP310, PCA400 and FLCP135 are Inhibitor Antiscalants used to manage the problems associated with hard water and the formation of scale across a wide range of commercial, industrial and process environments. Examples of scales in hard water are Calcium Carbonate, Strontium Sulphate, Barium Sulphate and Calcium Sulphate.

  • CSTP310 is an inhibitor antiscalant that contains carboxylate-sulphate tripolymer. Excellent in controlling both crystallization and particulate fouling of membrane surfaces
  • LCT35is an inhibitor antiscalant that contains phosphinocarboxylic acid. Excellent in controlling both crystallization and particulate fouling of membrane surfaces
  • LCT60is an inhibitor antiscalant that contains polycarboxylic acid. Excellent in controlling both crystallization and particulate fouling of membrane surfaces
  • PCA400 is an inhibitor antiscalant that contains phosphinocarboxylic acid. Excellent in controlling both crystallization and particulate fouling of membrane surfaces
  • SHMP500 is used to prevent calcium carbonate scale from depositing on the water side of condensers or heat exchangers, and in water conducting systems. It is also used as an agent for threshold corrosion inhibition in water treatment processes.

It is cost effective to prevent the build-up of these scales than to clean-up or replace Reverse Osmosis membranes and heat exchanger tubes.

Polyaluminium Chloride Manufacturers Perth

Polyaluminium Chloride (PAC) is freely soluble in water, and has quite strong ability to increase and enforce sedimentation, adsorption and agglutination during hydrolysis process. This product is mainly used to purify drinking water and treatment of industry waste water, such as the radioactive material and heavy metals such as lead, chromate, Arsenic, mercury and others in waste water. It is also widely used in precision casting, papermaking, tanning and some other fields. Aluminum has always remained the primary element of water purification used in both industries and household, which is why Polyaluminium Chloride manufacturers maintain huge inventory to successfully meet the demands. The source of aluminum is alum. Alum was low in cost and was available easily. But there are some other cost incurred after the purchase of the alum.

Additional chemicals are to be added to get the effective results. There is high amount of pH in alum that is to be reduced using chemicals like caustic soda. The treatment of the sludge and solid waste disposal is included thereafter. Thus, All Chemical being one of the trusted Polyaluminium Chloride manufacturers, Polyaluminium chloride is the solution we provide in Perth for better performances of waste water management. The chemical has lower pH levels that need less necessity of adding other chemicals. Polymers used with aluminum works better than polymers used as primary coagulants.

Flocculant Chemicals Supplier in Perth Australia

All Chemical Manufacturing & Consultancy is an Australian-based Flocculent supplier that cater for various industries. Polyaluminium Chloride (PAC) is freely soluble in water, and has quite strong ability to increase and enforce sedimentation, adsorption and agglutination during hydrolysis process. This product is mainly used to purify drinking water and treatment of industry waste water, such as the radioactive material and heavy metals such as lead, chromate, Arsenic, mercury and others in waste water. It is also widely used in precision casting, papermaking, tanning and some other fields.

Aluminium sulfate (Aluminum sulphate) is a chemical compound with the formula Al2(SO4)3. It is soluble in water and is mainly used as a flocculating agent in the purification of drinking water and waste water treatment plants, and also in paper manufacturing and as a mordant in dyeing and printing textiles. In water purification, it causes impurities to coagulate which are removed as the particulate settles to the bottom of the clarifier or more easily filtered. This process is called coagulation or flocculation.

All Chemical is a one-stop coagulant and Flocculent supplier and manufacturer. Selection of coagulants and Flocculents usually involves simple bench scale comparison tests on small samples of pulp for rough screening. Polymeric Flocculents are available in various chemical compositions and molecular weight ranges, and they may be nonionic in character or may have predominantly cationic or anionic charges.

Production Capability

All Chemical Manufacturing & Consultancy is a successful business enterprise with novel eco-friendly chemical manufacturing that integrates research, development, production and sale. Main chemical products are water purification products such as drinking water high-purity Polyaluminium chloride, industrial-grade Polyaluminiumchloride and Polyferric sulfate, Polyacrylamide, Aluminum sulfate, Cationic and Anionic Polymers with total annual productivity of 50 000 to 75,000 tons and still increasing year after year. These products are widely applied to purification of drinking water and all kinds of industrial waste water such as municipal sewage and many other kinds of industrial waste water.

All Chemical has an extensive production capability in which we can produce volumes of chemicals from pilot plant to commercial scale batches. Some may involve several chemical synthesis stages.Our products have passed rigorous quality control tests in our laboratory and we assure every client that our company complies with the regulations on product quality as well as occupational health, safety and environmental policies. Analysts, technicians and supervisory personnel are skilled and experienced graduates from tertiary learning institutions who priorities Good Manufacturing Practices (GMP).

Rest assured that you will receive high quality products and professional advice on chemical use in different chemical treatments and processes.

Quality Control Capabilities

The Quality Control Laboratory is responsible for testing and ensuring high-quality chemicals and services.

Facilities consist of:

  • General laboratory with facilities for carrying out standard analytical operations such as titrations, solvent extractions, distillations, melting point determination, Karl Fischer automatic titrations, ash content, loss on drying, thin layer chromatography, etc.
  • Balance room.
  • Laboratory offices
  • Storage room for retention of samples, glassware and laboratory equipment.
  • Analysts, technicians and supervisory personnel are skilled and experienced graduates from tertiary learning institutions.
  • The laboratory function is divided into the control of raw materials, in-process controls, and the control of finished goods. In addition to the above the Analytical Development Department has responsibility for method development.

The laboratory function is divided into the control of raw materials, in-process controls, and the control of finished goods. In addition to the above the Analytical Development Department has responsibility for method development.

About all chemical manufacturing & consultancy

All Chemical Manufacturing & Consultancy is a successful business run and managed by Professional Chemical Engineers with years of experience in Pharmaceutical manufacturing and Chemical manufacturing. Our proudly manufactured chemicals are used in a variety of industries which includes but not limited to Mining, Drinking water (Bore, Dam, River, Rain or Sea water), Waste water, Sewage waste, General Industrial liquid waste, Vineyards, Dairy and Cheese waste, Waste water generated from Machine and vehicle maintenance and many other industries.

Our professional consultancy to a variety of industry is not only restricted to the above-mentioned industries and products but also to the optimisation of new and existing chemical processes, water treatment and allied industrial chemical processes. For more information please refer to some of our products or contact us to discuss your needs. All Chemical Manufacturing & Consultancy values every business, Big or Small, Urban or Remote, Local or International.